Taurus T9.5, Assembly And Operating Instructions Manual

Page: 21 / 60

T9.5
21
Step 3: Assembly of the handrails
Connect the cables from the HRS control
that come out of the handrails (E/F) with
the cables coming out of the cockpit. Make
sure that the right handrail (F) is equipped
with the HRS control for speed and the
left handrail (E) with the HRS control for
incline. Now move the handrails (E and F)
into the corresponding adapters on the
cockpit (A).
Step 4: Assembly of the cockpit
If the control cable, as recommended in
step 2, is mounted with the wire on the
upper part of the left side frame (C), then
remove the wire now completely. Connect
the cockpit cable with the control cable
that you guided through the left upright
side frame (C) during step 1. Guide the
cable and the plug connection back into
the side frame so that the cable is not in
excess and cannot be squished during
assembly of the cockpit. Now place the
cockpit (A) on the two side frames (C/D)
and screw it tight with the screws (b).
NOTE
Make sure that the screws (b) neither damage the control cable nor the cable
from the HRS control!
Now press the plastic covers (G/H) on to the handrails and mount these with the
screws (e).
E
F
A
b
e
G
H
b
e