Taurus T9.5, Assembly And Operating Instructions Manual

Page: 17 / 60

T9.5
17
+ In order to be able to optimally lubricate the treadmill, the running belt must be
lifted slightly. Then apply some silicone spray on the entire running deck. Apply
three short (approximately 1 second) sprays of silicone lubricant between the belt
and the running deck.
+ The spraying tube should be held sideways in order to guarantee a moistening of
the entire underside of the belt. Continue to rotate the belt by hand so that the
entire area between the endless belt and running deck is lubricated. Wipe off the
excess lubricant.
+ This maintenance must also be executed after the equipment has not been used
for a longer period of time.
2.5 Maintenance and service calendar
The cockpit, casing, handrails and entire frame must be cleaned after every training
session with a moist towel (no solvent!) in order to avoid damage caused by sweat.
After 150 hours of operation, the maintenance symbol reminds you to clean the
treadmill. After you have cleaned the treadmill and checked all components, turn off
the symbol by simultaneously pressing the INCLINE up and INCLINE down buttons.
The following routine work must be done in the specified time intervals:
Part Weekly Monthly 2x annually Annually
Display console c I
Belt tension
I
Belt lubrication
I
Plastic covers
c I
Screws & cable
connections
I
Legends: C = cleaning; I = inspect