English
- Do not add new sections to the
extraction tube provided, as it could
cause the appliance to malfunction.
- The appliance should be used with its
base feet fitted.
- The appliance should be used with its
wheels attached.
Utiliser l’appareil avec les roues.
Assembly of the exhaust hose
-Lengthen one head of the hose, and
spin the exhaust hose into exhaust
conector (counter-clockwise).
Installation of window kit
-Partially open the window and then fix
the window kit to the window.
-The window kit can be installed on
most of normal and vertical windows
and it is adjustable.
- Fix the other end of the heat-exhausted
hose to the air-outlet window kit.
Instructions for use
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Press the ON/OFF button, the unit will enter in cooling
mode with low fan speed.
- Press the mode button to select cooling dehumidifying,
fan and heating mode.
Fan Speed
- Under the cooling and the fan mode, the speed goes
as follow:
- Lower Fan High Fan.
- Under the dehumidifying mode, fan is working in low
speed.
Timer function:
- The appliance´s operating time can be controlled from
1~24h.
- Press that button.
- You can set time through up and down buttons.
- Auto-shut off timer is only available when the unit is on.
- Up and down button can set temperature and timer.
- Under the cooling and heating mode, the setting
temperature ranges from 16º~31ºC.
Swing:
- Press this button to control the movement of the louver.
Cooling mode:
- Press mode to select cooling mode, cooling mode
indicator turns on.
- Press Up or Down to adjust temperature from 16ºC to 31ºC.
- Press speed to select high or low fan speed.
Fan mode:
- Press mode to select fan mode fan indicator turns on.
- Press speed to select high speed or low speed.
- Temperature and sleeping function cannot be setup.
Dehumidifying mode:
- Press “MODE” to select dehumidifying mode,
dehumidifying mode indicator turns on.
- Under dehumidifying mode, sleeping function cannot be
setup, and fan speed is low.
Sleeping mode:
- Press key “SLEEP” enter into sleeping mode, default
value of fan speed is low.
- When sleeping mode turns on , under cooling mode, the
first one hour later, setting temperature will go up 1ºC,
the second one hour later, setting temperature will go up
another 1ºC, and then keep the same .
- Sleeping mode is invalid under dehumidifying and
fan mode. Under water full, machine standby and mode
conversion, sleeping mode will be cancelled
Compressor protection:
- Three minutes later after power on / restart, compressor
starts to run.
Water tank full protection:
- When the water level in the bottom water plate is above
the warning level, the unit will alert automatically a.
-Please discharge water in the machine according to
chapter “water drainage”.
Water drainage:
- When the inner water tank is full, its indicator will flash
on the screen.
- The appliance enters into standby mode.
- Pull out the plug to drain out water, power off the
machine and restart it , the machine will runs normally .
-This model have self evaporative function, under cooling
mode, please do not use continue drainage to get better
cooling effect.
Once you have finished using the appliance:
- Turn the appliance off, using the on/off switch.
- Unplug the appliance from the mains.
