manualshive.com logo in svg

TATA Motors SUMO GRANDE, Owner'S Manual & Service Book

Share
Download
TATA Motors SUMO GRANDE Owner'S Manual & Service Book Download Page 59

5959

Folding of middle row seats from
inside the vehicle (from third row
seat).

Operate the seat 

latch ‘A’ 

to fold

the seat back on seat base.

Pull the seat release strap ‘D’
provided on seat base rear side
and tilt the seat base up so that it
is vertical and touching front seat.

To unfold the seat, slide the knob
‘D’, drop the seat. Operate latch
‘A’ to unfold back rest.

Third row seat

The third row seat is also front
facing. It can be accessed after
folding one of the middle row seats.
Two adjustable neck restraints are
provided on the third row seat.

This seat can be folded and also
can be removed as and when
required for more luggages.

Folding of third row seat

Latch is provided on back rest for
folding the seat backrest. Open the
tail gate to access the latch. Pull

the seat 

latch ‘1’

 to drop the seat

back on seat base.

Lift the 

handle ‘2’

 and tilt the seat

base up so that it is vertical and
touching middle row seat.

REAR SEAT ADJUSTMENTS

Getting Started

Ofrecido por www.electromanuales.com

Summary of Contents for SUMO GRANDE



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands