manualshive.com logo in svg

TATA Motors SUMO GRANDE, Owner'S Manual & Service Book

Share
Download
TATA Motors SUMO GRANDE Owner'S Manual & Service Book Download Page 43

43

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

WINDOW GLASS & STEERING ADJUSTMENT

Manual window winding :

In few versions, power windows are
not provided. In such vehicle, use
winder handle manually  for
lowering down or raising up window
glasses.

Rear Side Window Glasses :

Butterfly windows are provided on
both rear sides of vehicle to provide
ventilation for 3rd row occupants
when required. Pull the toggle to
unlock and open the window. For

Toggle

locking, pull toggle lever and press
it to lock.

NOTICE

It is advisable not to open the
windows when AC is ON. This will
adversely affect the AC
performance.

Steering Wheel Position
Adjustment

You can adjust the steering wheel
position to suit your convenience.

Adjust the steering wheel position
as follows before you start driving.

1. Adjust the seat to a comfortable

position.

2. The lever to tilt the steering

wheel is under steering column.
Pull the lever up and hold in that
position.

3. Move the steering wheel up or

down to the desired position.

Position the wheel such a way
that all the instrument panel
gauges and warning lights are
visible.

4. Release the lever.  Make sure

that steering wheel is securely
locked by moving up and down.

CAUTION

Steering wheel should be
adjusted only when the vehicle
is stationary.

Steering Adjustment Lever

Ofrecido por www.electromanuales.com

Summary of Contents for SUMO GRANDE



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands