manualshive.com logo in svg

TATA Motors SUMO GRANDE, Owner'S Manual & Service Book

Share
Download
TATA Motors SUMO GRANDE Owner'S Manual & Service Book Download Page 53

53

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Anti Theft/ Immobiliser cum Keyless Entry System (If fitted)

5

. Change the default PIN

number using above
procedure.

GUIDELINES FOR USER :

Q

The vehicle does not start
(Engine does not crank/fire)

Check the Lock Indicator on
the dashboard. If it is blinking
then the vehicle is not  supposed
to start ( Arm Mode/Auto Arm
Mode). Press UNLOCK button
on the User Remote and then
start the vehicle.

If the turn indicators are
blinking, pressing the UNLOCK
button of the User Remote will
stop the blinking of the lamps.
The next pressing of the
UNLOCK button of the User
Remote will unlock/disarm the
vehicle and then the vehicle can
be driven.Contact the dealer if
the vehicle still could not be
started.

Q

Pressing UNLOCK/LOCK
does not UNLOCK/LOCK the
vehicle.

If the turn indicators are
blinking, pressing UNLOCK/
LOCK will stop the blinking of
lamps. The next UNLOCK/LOCK
press will actually unlock/disarm
the vehicle and the vehicle can
be driven.

Q

Battery Low Indication :

1. 

Operating Distance has come

down

2.

 LED on user remote flashes

whenever UNLOCK / LOCK
button is pressed on the remote
(under normal battery
conditions, the LED on the user
remote lights continuously when-
ever UNLOCK / LOCK button is
pressed).

3.

 Replace the battery to get in

creased range.

Q

Press any of keys on remote, if
LED of the remote is
contineously 'ON' means battery
is OK. If it is blinking, then
remote battery is to be replaced.

NOTE :

 Remote may not be

operative in near transmission
vicinity of high power antenna (Like
TV)

Ofrecido por www.electromanuales.com

Summary of Contents for SUMO GRANDE



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands