manualshive.com logo in svg

TATA Motors SUMO GRANDE, Owner'S Manual & Service Book

Share
Download
TATA Motors SUMO GRANDE Owner'S Manual & Service Book Download Page 41

41

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

 CIGARATTE LIGHTER & CUP HOLDERS

Floor Console :

A) Cigarette Lighters:

Two cigarette lighters are provided
on floor console at front and rear.

Press the cigarette lighter in the
socket to heat up. When it reaches
the desired temperature, it will pop
up and can be used. These lighters
will operate only when Engine is
ON or Ignition key in ON position.

CAUTION

Handle the lighter carefully to
avoid personal injury.

If lighter does not pop out,
remove it to avoid overheating.

Avoid smoking inside the
vehicle; it may spoil inside
ambience, interiors, upholstery
etc.

Cigarette Lighter for front passengers

Cigarette Lighter for Rear passengers

B) Cup Holder:

Two cup holders are provided in the
floor console lid at the rear end for
the convenience of the rear seat
(2nd Row Seat) passenger. Open
the lid to use the cup holders. Keep
it closed when not in use.

Cup Holder for rear passengers

Ofrecido por www.electromanuales.com

Summary of Contents for SUMO GRANDE



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands