manualshive.com logo in svg

TATA Motors SUMO GRANDE, Owner'S Manual & Service Book

Share
Download
TATA Motors SUMO GRANDE Owner'S Manual & Service Book Download Page 19

19

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

Sumo Grande At a Glance

INSTR

INSTR

INSTR

INSTR

INSTRUMENT CL

UMENT CL

UMENT CL

UMENT CL

UMENT CLUSTER

USTER

USTER

USTER

USTER

•

When ignition key is turned to
“IGN” position, this indicator
lights up and goes off when
engine starts in normal
condition. If it continueously ON
while engine is running, get the
problem attended to an
Authorised Service Outlet.

Seat Belt Indicator:

The indicator initially flashes when
the ignition is ON and seat belt is
not fastened. It will continue to flash
until the vehicle exceeds a speed
of  20 kmph. After that, it will remain
continuously ON accompanied by
a buzzer that will buzz
approximately for 100 seconds.
After that, the buzzer goes OFF but
the indicator continues to remain
ON.

NOTE

NOTE

NOTE

NOTE

NOTE

Battery Indicator:

Symbol lights up when the ‘IGN’ is
turned ‘ON’ and should go ‘OFF‘
after the engine starts.

If it remains ‘ON’ while the
engine is running. It indicates
that the battery is not getting
charged. Switch off all
unnecessary electrical
equipment and get the
problem attended to at an
Authorised Service outlet.

Parking Brake Indicator
cum Low Brake Fluid
Warning Light :

This indicator has multiple
functions as follows :

•

It lights up when the parking
brakes is applied and goes off
when parking brake is
released.

•

It also lights up when brake fluid
level is low.

Odometer and Trip meter (on
LCD):

The odometer records the total
distance the vehicle has been
driven. The trip meter can be used
to measure the distance traveled
on each trip or between fuel fillings.
Keep track of the odometer reading
& follow the maintenance schedule
regularly for meeting service
requirements.

Ofrecido por www.electromanuales.com

Summary of Contents for SUMO GRANDE



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands