manualshive.com logo in svg

TATA Motors SUMO GRANDE, Owner'S Manual & Service Book

Share
Download
TATA Motors SUMO GRANDE Owner'S Manual & Service Book Download Page 44

44

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

Sumo Grande  At a Glance

FUEL FLAP OPENING

Fuel Tank flap opening:

The fuel flap is located on the left
rear side of the vehicle. The fuel
flap can be opened by pulling the
opening lever located at the right
hand side of the driver’s side for
RHD vehicle & left hand side for
LHD vehicle

WARNING

Fuel vapour is extremely
hazardous. Always stop the
engine before refueling and
never refuel near sparks or open
flames.

CAUTION

Remove the fuel filler cap slowly,
and wait for any hissing to stop,
then remove it. The fuel may be
under pressure & may spray
out, causing injury if the cap is
opened suddenly.

Fuel Flap Openning Lever

Always use only original
specification fuel cap or an
approved equivalent, available at
Authorised Dealers. The wrong
cap can result in a serious
malfunction of the fuel system
and the emission control
system.

Ofrecido por www.electromanuales.com

Summary of Contents for SUMO GRANDE



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands