TATA Motors SUMO GRANDE Owner'S Manual & Service Book Download Page 36

Page: 36 / 130

Sumo Grande At a Glance

LAMPS

High Mounted Stop Lamp:

High mounted stop lamp is
provided on the tail gate, and it
glows whenever service brake is
applied.

Registration Plate Lamps:

Two concealed lamps are provided
for illumination of the rear
registration number plate.

Door Lamp :

These are provided on the inner
side of the front and rear doors to
warn the traffic coming from the
rear that the door is open.

Door Puddle Lamp :

This is provided on the bottom side
of the doors to assist the user for
easy entry and exit during night.

Engine Compartment Lamp :

This lamp is provided for your
convenience.

High Mounted Stop Lamp

Registration Plate Lamps

Engine Compartment Lamp

Ofrecido por www.electromanuales.com

Summary of Contents for SUMO GRANDE



































































































































Search results

Summary of Contents for SUMO GRANDE

Reviews:

Brands by name

Popular brands

TATA Motors SUMO GRANDE, Owner'S Manual & Service Book

Search results

Summary of Contents for SUMO GRANDE

Reviews:

Brands by name

Popular brands