TATA Motors Nexon EV 2003, Owner'S Manual, Page: 80 / 308

step 4 to start 220V AC power supply
from vehicle. If user couldn’t press V2X
switch within 120sec of step 3. Re-
move the Gun completely and repeat
from step 3 to initiate the V2L function.
Ensure safety precaution against the
9.
live 220VAC voltage in the V2L adap-
tor
Turn on the loads.
10.
Check telltale indication in instrument 11.
cluster to ensure V2L discharging is
initiated/in progress
Check for the telltale indication fre-
12.
quently when the V2L discharge func-
tion is in progress to ensure there is no
interruption/fault.
V2L function will stop if there is no en-
13.
ergy dissipation has happened/if there
is no load is connected for 100secs
from successful step 8. In this case, re-
move the gun completely and start
from step 3 to reinitiate the V2L dis-
charge function
To stop the V2L discharge function,
14.
First switch off the external loads and
then press V2X switch second time to
disable the 220V AC power supply and
Go to step 17.
V2L function will automatically stops if
15.
the source vehicle SOC goes below
the user set value or at the default
value of 30%. In that case go to step
17
In case V2L function gets interrupted
16.
from vehicle side due to any fault,
Press the Gun unlock fascia switch in
vehicle and completely remove the
gun repeat from step 3.
If the issue still remains, Press the •
Gun unlock fascia and completely
remove the gun. Keep the vehicles
in Ignition OFF state for 120sec.
Then repeat from Step 3.
If the charging get interrupted
•
again from vehicle side go to step
17 and vehicle along with the V2L
adaptor need to be taken to nearby
TATA service station
Switch off and remove the Connected 17.
Loads then Press Fascia switch and
remove the V2L adaptor. (Close the
V2L adaptor caps to ensure it is not ex-
posed to mud/metal particle etc).
DON’TS
Don’t crank the vehicle during V2L 1.
charging
Don’t use unauthorized V2L adaptor
2.
Don’t use High power home appli- 3.
ances like air conditioner, dryer having
power consumption more than 3.3Kw
and current requirement more than
16A
Don’t hang the appliances on the V2L
4.
adaptor
Don’t use appliances or extension box
5.
which is not having national safety cer-
tificate. Refer each device manual to
know the usage and precautions to be
taken.
Don’t use any unhealthy or improper
6.
electrical connection/ apparatus for
V2L discharge function like loads with
insulation failure, short circuit, im-
proper 3pin/2pin plug, open cables
without plug)
Don’t allow the appliances/extension
7.
box cables to twist or overlapped.
CHARGING
71