TATA Motors Nexon EV 2003, Owner'S Manual, Page: 243 / 308

234
New sealant and replacement parts can
be purchased from your authorized repair
shop or dealer. Sealant bottles can be dis-
posed with house-hold waste.
For Normal Tire - Checking / Inflation
Of Tire Pressure Follow The Below
Process
Remove the puncture repair kit from •
the luggage area.
Insert the power plug into the 12V
•
power socket connection and start the
vehicle in idling.
Remove the plug from the tire valve
•
and screw the inflator hose into the tire
valve
Press the switch to “I” present on the
•
inflator and the motor will start to in-
flate.
As specified pressure is achieved then
•
switch to “0” present on the inflator and
compressor will turn off.
Check the tire pressure again. If tire
•
pressure is too high, deflate the tire to
the specified pressure using the pres-
sure “air release” valve.
Remove the inflator hose from the tire
•
valve and plug the tire valve safely.
Remove the power plug 12V from the
•
power socket and assemble it properly
and keep the unit in luggage space
again for next use.
bumps or similar damage on the side
wall, do not continue to use the tyre.
WARNING
After using the sealant you may drive
no faster than 80 km/h and the dam-
aged tyre must be replaced as quickly
as possible (within a maximum driving
distance of 200 km.
NOTE
Remember that emergency road-side
tire repair kits only provide temporary
mobility. You should consult a tire spe-
cialist for advice.
NOTE
New sealant and replacement parts can
be purchased from your authorized re-
pair shop or dealer. Sealant bottles can
be disposed with household waste.
EMERGENCY AND BREAKDOWN