TATA Motors Nexon EV 2003, Owner'S Manual, Page: 69 / 308

60
Pull the ‘Charging-inlet Flap Open 4.
Lever’ to open the charging door.
Open the charger-inlet flap.
5.
Before connecting the charging gun to 6.
vehicle charging socket, make sure the
gun lock is released.
Remove any dust on the Charging 7.
Gun and Charging Inlet.
Connect the charging gun to vehicle
8.
AC and DC Charging Inlet.
Switch on the DC charging station sup-
9.
ply.
Charging Gun will be locked after 10.
switching on the DC charging station.
You hear a “click”, when the Gun is
11.
connected correctly, Click sound is be-
cause of Gun locking after supply is
switched on.
Normally the car starts automatically 12.
charging. If not, please refer Charging
Gun’s Fault Indication & Indication Pri-
ority Table on the charging station.
To know the State of Charge, Time to 13.
Charge and Gun connection status
please see instrument cluster. This sta-
tus is displayed only when driver door
is opened.
CAUTION
If the Gun Lock is not released please
don’t insert the Charging Gun forcefully
into the socket. It may damage the
Charging Socket.
NOTE
When vehicle is in Charging Mode, it
will not go in Drive (D), Sport (S) or Re-
verse (R).
CHARGING