TATA Motors Nexon EV 2003, Owner'S Manual, Page: 144 / 308

Procedure to Start EV
With the smart key sit in the driver’s 1.
seat (if equipped)/Engage the key in
the lock set.
Fasten the seat belt before you start
2.
the vehicle.
Turn off all electrical devices.
3.
Make sure to engage the parking 4.
brake for your safety.
Make sure the accelerator and brake
5.
pedal have clearance with your right
foot.
Make sure to press and hold the brake
6.
pedal. Press and hold the brake while
pressing the start/stop button or turn-
ing the key to on position.
The vehicle will get ON in ‘P’ mode
7.
only and it will be automatically se-
lected.
When ‘Ready’ message appears, you
8.
can drive the vehicle. Else, you cannot
drive the vehicle. Start the vehicle
again.
Shift using monostable shifter to the
9.
desired position (D/R). APB will be still
engaged.
Release the parking brake and slowly
10.
release the brake pedal. See if the ve-
hicle slowly moves forward, then press
the accelerator pedal.
NOTE
If the APB is disengaged manually •
after selecting required mode (D/R),
release the brake pedal slowly to
move the vehicle forward with creep
activated condition. Further Acceler-
ator pedal input to be given for
achieving required speed.
If start/stop button is pressed with-
•
out brake pedal in pressed condi
tion, first press will bring the vehicle
to Accessories On condition. Sec-
ond press will bring the vehicle to Ig-
nition ON condition. Third press will
switch of the vehicle. Here brake
pedal is not pressed down. For
cranking of vehicle, Brake pedal
need to be pressed.
STARTING AND DRIVING
135