77
hot heater rod of the flame glow
plug, evaporates and ignites.
The post heating operation begins
once the start procedure has ended.
The duration is determined by the
engine temperature (coolant water)
when the post heating commences.
Power continues to be supplied to
the flame glow plugs, the solenoid
valve remain open and indicator light
goes off.
If the start procedure is unsuccessful,
then the solenoid valve and flame
glow plugs are shut off, the ignition
must be switched off before
attempting to restart. Where
temperature exceeds the system
stop temperature, the indicator light
immediately starts flashing to
indicate start ready, after the ignition
has been switched on.
No power is supplied to the flame
glow plug and the solenoid valve.
3.4 Special operating conditions
Driving
