123
Head lamp alignment
The head lights must be properly
aligned in order to obtain maximum
road safety as regards proper road
illumination and to reduce the glare
on the oncoming traffic.
It is recommended to check the
alignment of head lights periodically
and whenever bulbs are replaced, by
means of screen as shown in figure.
The head lamp alignment in this
type, asymmetrical dipped beams, is
done only by adjusting the dipped
beams unlike other head lamps
where main beams are adjusted.
e) Head Lamp Focusing
Park unloaded vehicle with no sag in
suspension springs and all tyres
equally inflated, 10 m away from the
screen with it’s center in line with
the central vertical line on the screen
at right angles to longitudinal axis of
the vehicle.
●
Keep the leveling switch at ‘0’
position.
●
On the marked up screen, the
area above the horizontal and
inclined lines (shaded) is called
4.15 Electricals
Maintenance
Motorised head lamp
1. Vertical adjustment screw
2. Horizontal adjustment screw
3. Fine adjustment setting screw
1
2
3