115
Cable adjustment on centre flap
locking mechanism.
●
Centre flap is locked by two
piece toggle locks fixed on front
end of fire wall on LH & RH
sides.
●
Centre flap gets locked when it
is lowered and pressed gently
against fire wall.
●
Flap gets unlocked when release
lever (located above accelerator
pedal) is pulled back.
●
Cable outer is of two part and
inner is single piece with two
locking sieves.
●
In order achieve proper locking
and unlocking, it is necessary to
fix the outer cable with out
slackness.
●
Cable outer first part is between
release lever and toggle lock
RHS.
●
To adjust slackness on first part
of cable, loosen lock nut “2” and
tighten adjustment nut “1” till
the desired stiffness is achieved.
●
Tighten lock nut “2” firmly.
●
Cable outer second part is
between the toggle lock RHS &
LHS.
●
To adjust slackness on second
part of cable, loosen lock nut “2”
and tighten adjusting nut “1” till
desired stiffness is achieved.
●
Tighten lock nut “2” firmly.
4.12 Centre flap
Maintenance
Outer cable first part
1.
Adjustment nut
2.
Lock nut
1
2
Outer cable second part
1.
Adjustment nut
2.
Lock nut
2
1
