70
Squeegee assembly
Filling the fresh water tank
Dosing:
Dosing examples:
Dosing variants
Pre-cleaning
• Lie the squeegee on the floor in front
of the machine.
• Tilt the machine towards the back
and run over the squeegee.
• Place the machine back on the floor.
• Set the locking nuts into the foreseen
slots.
• Turn the locking nuts 90°.
Attention:
Max. permissible water temperature
60 °C/140 °F.
Diversey recommends using cold water
since hot water will adjust to the floor tem
-
perature as soon as it is in contact with the
floor. Thus there are no advantages to us
-
ing hot water.
• The machine must be switched off.
• Remove the rubber cap from the solution tank.
• Fill water into the solution tank until
the maximum filling level is reached.
• Refit the rubber cap to the solution tank.
Attention:
Wear gloves, goggles and appropriate
(protective) working clothes when han
-
dling chemical products!
Notice:
Use chemical products recommended by
Diversey only and always observe the
product information.
Caution:
Using unsuitable products (e.g. products
containing chlorine, acids or solvents) may
cause harm to health and severe damage
to the machine.
10L
Notice:
For a precise dosage, use the scale in the
dosage cup.
The filling level mark on the tank corre
-
sponds to the mark in the dosage cup. The
type of machine is also noted in the dos
-
age cup!
Information on the package
of the product
Tank capaci
-
ty
Product vol
-
ume per tank
filling
0.25%
25 ml for 10l
of water
10l
0.25l
0.5%
50ml for 10l
of water
10l
0.5l
• Fill the dosing cup with a suitable product and pour the con
-
tent into the fresh water tank. Repeat the procedure until
the required dosing is reached.
• When dosing is finished, the dosing cup will remain in the
tank.
• The TASKI J-Flex or the QFM dosing station can also be
used for simple and fast dosing.
For further details, please contact your TASKI service part
-
ner.
Attention:
Remove any objects (wooden, metal parts
etc.) from the cleaning surface.
The objects could be catapulted by the ro
-
tating tool, and thereby cause injuries to
people and damage to the environment.
Summary of Contents for swingo 350B
