20
9
Cleaning the AXON body Camera
Use a soft, damp cloth to clean the surface of the AXON body camera. Do not use harsh cleaners or solvents.
Do not immerse the AXON body camera in water or cleaning solutions.
If the AXON body camera lens becomes dirty, use a lens blower brush to clean it and then wipe it with a soft
cloth if necessary.
You may moisten the cloth with isopropyl alcohol.
• Do not use Windex® or similar type cleaners on the camera lens.
• Do not place the lens under running water or apply jets of water to the camera lens.
Charging the Battery
A fully charged camera battery should provide enough power for approximately 12 hours of normal operation.
Recharging a battery after a 12-hour use can take up to 6 hours if you are recharging your AXON body camera
from a wall outlet or an ETM. Recharging could take considerably longer if you are recharging from a computer.
If the battery depletes significantly during use, you will hear 4 quick tones repeating every 20 seconds. This
message indicates that less than approximately 20 percent of the battery capacity remains.
Always recharge a depleted battery as soon as reasonably possible. You can use an ETM, wall charger, or
computer to charge the battery. Using a non-TASER approved wall charger may degrade device performance
and will void the warranty.
Care and Maintenance
