15
6
Using the ETM
After recording, use the evidence transfer manager (ETM) to recharge your AXON body camera and upload your
files to EVIDENCE.com.
1
Ensure the ETM is plugged into a power supply, is connected to the internet, and is powered on.
2
Dock the camera in the ETM. The docking bays plug into the top of the camera.
At first, the LED on the bottom of the camera will display red, but the color will change to indicate the
camera’s stage in the uploading process.
System Status
Camera Bottom LED Indication
Uploading Data.
Blinking Yellow
DO NOT Remove the Camera from the ETM.
Device Ready (All Videos Uploaded Successfully).
Solid Green
In Queue Awaiting Upload
Solid Yellow
Initial Connection (Momentary).
Solid Red
Device Not Assigned, Agency Mismatch, or
Camera Set In The Offline Mode.
Blinking Red
Consult ETM Support Page.
ETM Has No Communication With Camera.
LED Off
Firmware Update, Internal Battery Charging, or
Memory Full.
Blinking Red and Yellow
DO NOT Remove the Camera from the ETM.
Network Error.
Blinking Red, Yellow, and then Green
Recharging the Battery & Uploading Data
to EVIDENCE.com
