5 − Playback
TASCAM SS-CDR1
37
End of disc/track message (EOM)
If the EOM function is on, an EOM tally signal will be out-
put from the
CONTROL I/O
(
PARALLEL
) connector when
the time remaining in the track or the play area falls below
the specified duration.
Specifying an EOM tally output trigger
Use menu mode to specify the remaining track time or
playlist time that will trigger the output of an EOM tally
signal (for details on menu operations, refer to “Operations
in the menu screens” on page 18).
1 Press the
MENU
key to access the main menu list
screen.
2 Select the PLAY menu.
3 Highlight PREFERENCE.
4 Press the front panel
˚
key (or the remote’s
cursor
¥
) key to proceed to the PLAY PREFER-
ENCE screen.
5 Select EOM TRACK if you want to use the track
remaining time as the trigger, or EOM MEDIA if
you want to use the remaining time in the play
area as the trigger.
6 Turn the
MULTI JOG
dial (or use the remote’s
cursor
§
, ¶
keys) to specify the remaining time
that will trigger the tally output.
You can choose from the range of
OFF
or
1–99
(sec-
onds).
7
When you’ve finished making settings, press the
TIME (ESC)
key to return to the home screen.
NOTE
This setting is remembered even when the power is
off.
Example of actual use
1 To the
CONTROL I/O
(
PARALLEL
) connector, con-
nect the device that will receive the EOM tally
signal.
2 Power-on the SS-CDR1 and the receiving device.
3 Begin playback on the SS-CDR1.
When the remaining time of the current track or the
play area falls below the specified time duration, the
EOM
indicator in the home screen will blink, and an
EOM tally signal will be output from the
CONTROL I/O
(
PARALLEL
) connector.
If the remaining time of both the track and the play area
have been specified as triggers, an EOM tally signal
will be transmitted when either condition is satisfied.
