5 − Playback
28
TASCAM SS-CDR1
NOTE
In this owner’s manual, we will assume that continu-
ous playback is selected as the playback mode unless
otherwise specified.
Using the menu
(For details on how to perform menu operations, refer to
“Operations in the menu screens” on page 18).
1 While stopped, press the
MENU
key to enter menu
mode.
2 Turn the
MULTI JOG
dial to highlight the PLAY
menu item, and then press the
MULTI JOG
dial.
3 Select the PLAY MODE item.
4 Turn the
MULTI JOG
dial to select the desired play
mode.
5 Press the
TIME (ESC)
key to return to the home
screen.
NOTE
The play mode you select is remembered even when
the power is turned off.
Program playback
Here is how to play back tracks in the order of the program
you specify. You can specify a program of up to 99 tracks.
1 While stopped, set the play mode to program play
mode (see “Specifying the playback mode” on
page 27).
2 Use the remote’s numeric keys (
0–9
) to enter the
desired track number for the program, and press
the
ENTER
key to confirm it.
The track will be registered in the program.
NOTE
If you are operating from the SS-CDR1’s front panel,
turn the front panel
MULTI JOG
dial to select the track,
and then press the
MULTI JOG
dial.
3 Repeat step 2 to register each of the desired
tracks in the program.
The screen will show the program number and
the total time.
NOTE
You can program the same track repeatedly.
•
Pressing the remote’s
•
CLR/ESC
key will delete the
last-programmed track from the program.
If you attempt to program the 100th track, an error
•
message of
PROGRAM FULL
will appear. A maxi-
mum of 99 tracks can be programmed.
For WAV files or MP3 files, the display will indicate
•
--H--M--S
if the total time of the programmed
tracks exceeds 99 hours 59 minutes 59 seconds. For
an audio CD, the display will indicate
--M--S
if the
total time exceeds 99 minutes 59 seconds.
In the case of a CD that contains WAV files or MP3
•
files recorded by a device other than the SS-CDR1,
the total time will not be displayed. Instead, the
time display area will show the
--H--M--S
indication.
4 Press the
PLAY
key to begin program playback.
NOTE
In program play mode, you won’t be able to play
•
unless at least one track has been registered in the
program.
If you press the
•
STOP
key while stopped, all
program data will be cleared.
The program data will be cleared when you switch
•
the play mode.
The program data will be cleared when you power-
•
off the SS-CDR1.
Switching the playback time display mode
You can select the way in which the playback time is
shown in the home screen.
1 Press the front panel
TIME (ESC)
key (or the re-
mote’s
TIME
key).
Each time you press this key, you will cycle through
four types of time display. The currently selected dis-
play mode is shown above the time display area.
No indicator
The elapsed time of the current track is shown.
REMAIN
is lit
The remaining time of the current track is shown.
TOTAL
is lit
The elapsed time from the beginning of the play area is
shown.
TOTAL
and
REMAIN
are lit
The remaining time in the play area is shown.
NOTE
While stopped, the total playback time of the play
•
area is always shown, regardless of whether
TOTAL
and
REMAIN
are lit.
In the case of a CD containing WAV files or MP3
•
files that were recorded using a device other than
the SS-CDR1 (e.g., a computer), the total time while
