Tascam SS-CDR1 Owner'S Manual Download

Page: 33 / 88

5 − Playback

TASCAM SS-CDR1

Auto Ready function

If the Auto Ready function is on, playback will pause at

the beginning of the next track when a track has finished

playing.
You can switch the Auto Ready function on/off by pressing

the remote’s

A.READY

key.

A.READY key

If the Auto Ready function is on,

A_READY

will be lit in the

home screen.

Turning the Auto Ready function on/off from the front panel

You can also turn the Auto Ready function on/off from the

front panel via the menu (for details on operations in the

menu screen, refer to “Operations in the menu screens” on

page 18).

1 Press the

key to access the main menu

screen.

2 Select the PLAY menu.
3 Select the AUTO READY item.

4 Turn the

MULTI JOG

dial to turn the setting on/

off.

When you’ve finished making the setting, press

the

TIME (ESC)

key to return to the home screen.

NOTE

The Auto Ready setting is remembered even if the
power is off.

Call function

The Call function returns to the point at which you most

recently initiated playback from the pause condition (the

“Call point”), and pauses there.
To execute the Call function, press the front panel or

remote’s

CALL

key during playback or while stopped.

CALL key

The Call point will be erased when you perform the follow-

ing operations.

Turn off the power.

•

Remove the media.

•

Switch the current device.

•

Switch the play mode.

•

Switch the play area.

•

Modify the contents of the media (by recording, edit-

•

ing, or erasing).

NOTE

If you press the

•

CALL

key when a Call point has not

been specified, the display will indicate

NoCall-

Point

You can’t use the Call function in program play

•

mode or random play mode.

Summary of Contents for SS-CDR1

























































































Search results

Summary of Contents for SS-CDR1

Reviews:

Related manuals for SS-CDR1

Brands by name

Popular brands

Tascam SS-CDR1, Owner'S Manual

Search results

Summary of Contents for SS-CDR1

Reviews:

Related manuals for SS-CDR1

Brands by name

Popular brands