TASCAM GB-10
77
13-Using the tuner
This unit has a built-in tuner. By inputting the sound of an
instrument, you can use the tuning meter on the display to
tune that instrument accurately. In addition, you can output a
tone for tuning from the /LINE OUT jack, which is onvenient
for tuning multiple instruments simultaneously, for example.
Preparation
1. Press the TUNER button to open the TUNER screen.
2. The “MODE” item is shown. Use the
[
ª
] button and
Á
button to select the tuner mode. The options are
AUTO (
[
ª
] : chromatic tuner mode) and OSC. (
Á :
oscillator mode).
After selecting the mode, press the TUNER button again to
make settings for that mode.
3. The first item shown for each mode is “CALIB”. Use this
to set the frequency of A between 435 Hz and 445 Hz.
The setting value is shown on the right side of the screen.
This setting is the same for both tuner modes.
Use of each tuner mode is explained below.
Summary of Contents for GB-10
Page 5: ...TASCAM GB 10 5 IMPORTANT SAFETY INSTRUCTIONS...
Page 98: ...98 TASCAM GB 10 Notes...
Page 99: ...TASCAM GB 10 99 Notes...
