Tascam GB-10, Owner'S Manual

Page: 46 / 100

46
TASCAM GB-10
Recording
Before following these procedures, adjust the input level and
open the Home Screen.
1. Press the RECORD [
º
] button briefly to start ordinary
recording.
When recording starts, the RECORD [ º
] button indicator
lights and the display shows the elapsed and remaining
recording times.
Press and hold the RECORD [
º
] button to enable the pre-
record function and put the unit into recording standby.
The RECORD [
º
] button indicator blinks when in recording
standby. (See “Recording a few seconds before pushing the
record button (pre-recording)” on page 46.)
2. Press the [
ª
] button to stop recording.
To pause recording, press the RECORD [
º
] button. To
resume recording to the same file, press the RECORD [ º ]
button again.
Press the [
ª
] button after pausing to complete the
creation of an audio file with the music recorded up to the
moment that recording was paused.
Recording a few seconds before
pushing the record button (pre-
recording)
The unit can capture up to 2 seconds of input signal during
recording standby, allowing recording to start before the
RECORD [
º
] button is pushed.
1. Press and hold the RECORD [
º
] button briefly to start
recording standby. The RECORD [
º
] button indicator
blinks, and the PRE ( ) icon appears on the display.
2. Press the RECORD [
º
] button again briefly to start
recording. Input signal is recorded starting up to 2
seconds before the button was pushed.
The RECORD [
º
] button indicator lights when recording.
3. Press the
[ ª ] button to stop recording.
To pause recording, press the RECORD [ º ] button. To
resume recording to the same file, press the RECORD [
º
]
button again.
5-Recording