Taramps Tarsafe TMA 10 G4, Manual

Page: 14 / 16

Programming
- Turn on the ignition.
- Put the OR/BLK wire to GND until beep 11.
- The alarm will sound according to the current setting:
1 Beep = Canceled
4 Beeps = Activate and Deactivate without BEEP
3 Beeps = Activate with BEEP and Deactivate by Control
2 Beeps = Activate without BEEP and Deactivate by Control
5 Beeps = Activate and Deactivate with BEEP
15)Activate alarm when walking away
This function is used to activate the alarm when moving the TR2P remote control away from the motorcycle.After
turning off the ignition and moving the TR2P control away, beyond the transmission range, the alarm will activate in
up to 15 seconds.
1st Beep = Canceled function, the alarm only activates/deactivates by remote control.
2nd Beep = Activates the alarm, Without BEEP and the TURN SIGNALS do not flash when the control is moved away,
and only Deactivates when pressing the Deactivate button on the control.
Alarm activation settings:
3rd Beep = Activates the alarm With BEEP a nd the TURNING SIGNALS do not flash when the control is moved away,
and only Deactivates when pressing the Deactivate button on the control.
4th Beep = Activates the alarm without Beep and the TURN SIGNALS do not flash when you move the control away,
and Deactivates the alarm without BEEP as soon as you receive the automatic transmission of the control or press
the Deactivate button on the control.
5th Beep = Activates the alarm With BEEP and the TURN SIGNALS do not flash when the control is moved away, and
Deactivates the alarm With BEEP as soon as receiving the automatic transmission of the control or pressing the
Deactivate button on the control.
To change, touch the OR/BLK wire on he GND the number of times related to the desired
setting. At each touch, the alarm confirms with 1 beep. After turning off the ignition, beeps
confirm the new setting.
Change NEGATIVE signal of the
alarm (200mA) for PO12V
alarm wire
85
30
+12V
87
86
+12V output
Turn on the Ignition through the OR wire
Start the engine through the GR wire
alarm wire
ORANGE
alarm wire
GR
85
30
+12V
+12V IGNITION on
on start button
87
86
85
30
87
86
+12V Ignition
wire connected to
starting engine
Battery negative
Change NEGATIVE signal of thealarm
(200 mA) into NEGATIVE of higher power
30
85
87
Alarm wire
negative output
86
+12V
Battery
positive
Select Beep function 11
OR/BLK
to
GND
Setting:
1X = Cancel
2X = only Activates without Beep
3X = only Activates with Beep
4X = Activate and Deactivate
without beep
5X = Activate and Deactivate
with Beep
16) Relay Connections
The AUXILIARY 1 and 2 outputs are
NEGATIVE outputs and handle a maximum
of 200mA.
For higher consumption or POSITIVE signal,
use relay.
13