Taramps Tarsafe TMA 10 G4, Manual

Page: 8 / 16

Assault mode time setting, 1, 2 or 3 minutes
2 Beeps = Block in 2 Minutes
3 Beeps = Block in 3 Minutes
- Turn on the ignition.
1 Beep = Block in 1 minute
- Put the OR/BLK wire on GND until beep 5.
- The alarm will sound accordingto the current setting:
To change, touch the OR/BLK wire one the GND the number of times related to the desired
configuration. At each touch, the alarm confirms with 1 beep. After turning off the ignition,
beeps confirm the new setting.
Select Beep function 9
OR/BLK
to
GND
Setting
Example:
1x 1 minute
2x 2 minutes
3x 3 minutes
Attention: Function Disabled in the Standard configuration, it is necessary to enable it in Beep 6 of the
configuration. In G4 alarms, the assault mode by Secret Button, Beep 6, and the assault mode by
Presence, Beep 5, can be enabled together
8) Secret Button Assault Mode - disabled in standard configuration.
8.1) Parking Function (only for Assault Mode by Secret Button)
How it works:
With the ignition on, press the Secret Button for 1 second. If not, Assault mode is activated. After the programmed
time, (according to the Beep 9 setting), it triggers the siren and turn signals, another 10 seconds the engine starts to
stop until it turns off. To cancel the blocking, press the SECRET BUTTON.
ATTENTION: The control does not cancel the assault mode by SECRET BUTTON.
Enable Assault Mode by Secret Button
2 Beeps = DISABLE
- Turn on the ignition.
1 Beep = ENABLE
- The alarm will sound with the current setting:
- Put the OR/BLK wire on GND until beep 6.
without having to indicate the position of the Secret Button.
How it works:
Turn off the ignition and press the Secret Button 3 seconds.
It is used to leave the motorcycle in a parking lot, for example,
Lights flash 3 times confirming activation.
To cancel the Parking function, turn on the ignition and press
the Secret Button for 1 second.
+
IGNITION
OFF
ON
START
OFF
SECRET
BUTTON
3 Seconds
Attention: If the Orange wire is configured as Auxiliary Output 2, the Secret Secret Button Assault mode
cannot be enabled. Change settings for 1st Beep - item 13
To change, touch the OR/BLK wire on the GND the number of times related to the desired
configuration. At each touch, the alarm confirms with 1 beep. After turning off the
ignition, beeps confirm the new setting.
Select Beep function 6
OR/BLK
to
GND
Setting
1X Enable
2X
Disable
07