Suporte Técnico
Technical Support / Apoyo Técnico
+55 18
-3266-4050 /
+55 18
99627-3364
suportetecnicotaramps
For correct operation, check the battery voltage with the motorcycle turned off. If the battery is less than 12V, please
recharge or replace it. Make sure that the battery is charging with the motorcycle on.
Auxiliary Output
8 and 9 - Green / Black
Dedicated Siren
+ 12 Vcc
Turning Signal
11 - Red
12 - Gray
10 - Gray
6 -
Gray
5 - Orange/ Black
4 - Orange
Programming
press to GND
3 - Black
GND
2 - Blue
Ignition
1 - Green
ENGINE BLOCK
MAX. 20A
7 - Black/ Yellow
According to Configuration:
1- Trunk/Trunk Button
2- High Beam Signal to activate
the GATE - only in the TMA30
3- Gearbox NEUTRAL sensor.
According to Configuration:
1- Secret Button
2- Auxiliary 2 PULSE
3- Auxiliary 2 HOLD
- IT IS NECESSARY TO ACTIVATE THE AUTOMATIC TRANSMISSION OF THE TR2-P CONTROL
- In the TMA G4 line, the standard configuration of the assault by presence mode is ENABLED, and it can be
CANCELED in Beep 5 of the configuration.
- To prevent false triggers due to the inclination sensor, the alarm central must be well fixed, through the
double-sided tape.
Attention:
Alarm basic operation:
When activated by remote control,
the control unit records the inclination of the motorcycle.
Another 10 seconds, changing the inclination or turning on
the ignition triggers the alarm.
10) Installation Scheme
09
Summary of Contents for Tarsafe TMA 10 G4
Page 1: ...MANUAL MOTORCYCLE ALARM TMA 10 TMA 20 TMA 30 ...
Page 16: ...MN_016030_R01 ...