WARNING
During battery inspection, watch for fire and be careful not
to
touch the electrolyte with clothing or part of your body.
See
"Tips for Safety" in SAFETY
PRECAUTIONS.
BATTERY
RECHARGING
1.
For charging the battery on this tractor, a slow charging
operation should be carried out at 4.5 amp.
2.
In case the specific gravity is below 1200kg/m
3
, make
lower
rate charging at 3 amp. For more information, consult
local
dealer.
NOTE
Don't forget to turn off the lamp and don't treat the battery
in
such a way as may be discharged rapidly.
TRANSMISSION OIL
REPLACEMENT
Drain Plug
Remove the drain plugs under the rear part of the transmission
case and drain the transmission oil.
NOTE
When replacing the transmission oil, it is necessary to
clean oil filter element at the same time.
To fill the transmission case with oil, tighten the drain plug first,
and remove the transmission oil level plug and then pour the oil
into the filler port in the shift cover until oil overflows from the
transmission oil level plug port.
Oil level plug
36
Summary of Contents for VST 818
