082406-40
TC36.CSTE 11
STANDING PILOT FUNCTION
(only for use where permitted)
The control system on this fi replace is shipped as a non-stand-
ing pilot fi replace. If required the system can be converted to
a standing pilot by depressing a recessed button located on
the lower right hand side of the wall control. (Fig. #20) This
should be depressed with a paperclip, pencil or other thin
object. Once activated the pilot will run continuously. Please
check with your local inspector to ensure that this is permit-
ted in your area.
CONTROL SYSTEM (REMOTE CONTROL SETUP)
This fi replace is supplied with a wall control and hand held
remote control.
Please note only genuine Town & Country
Fireplace wall controls and hand held remote controls
can be used on this fi replace.
1)
Initial set up of the hand held remote is required. A “learn”
button is located on the lower left hand side of the wall
switch. This should be depressed with a paperclip, pencil
or other thin object. (Fig. #21)
2)
Once this has been pressed, press the center button on
the hand held remote. (Fig. #22) The fi replace will then
turn on.
3)
Turn off the fi replace by pressing the center button again.
The handset is now synchronized with the fi replace.
Fig. # 20
STANDING PILOT
BUTTON
Fig. # 21
LEARN BUTTON
Fig. # 22
ON/OFF BUTTON
Fig. # 23
HOLD
A2
FLASHES
DAY
HOUR:
MIN
HOLD
A1
Summary of Contents for TC36ST
Page 38: ...38 TC36 CSTE 082406 40 NOTES...
Page 39: ...082406 40 TC36 CSTE 39 NOTES...
