TANDBERG 700 MXP User Manual Download

Page: 222 / 307

TANDBERG 7000 MXP

208

4.8.2.3 SIP Settings

Mode

Setting the SIP mode to on will enable the system for incoming and outgoing SIP
calls.

Off

Setting the SIP mode to off will disable incoming and outgoing SIP calls from the
system.

Display Name

The Display name part of the SIP Address (URI) is usually a full name or system name.

Examples:

“Alice Wonderland”
“System 01”

SIP Address

The SIP Address is the SIP URI used to address the system.

SIP Address (URI): <text field>

Examples:

“[email protected]”
“1234”
“[email protected]”

Server Discovery

Auto

When Auto is selected, the SIP Server address is obtained using Dynamic Host
Configuration Protocol (DHCP).

Manual

When Manual is selected, the manually configured SIP Server address will be
used.

Summary of Contents for 700 MXP




















































































































































































































































































































Search results

Summary of Contents for 700 MXP

Reviews:

Related manuals for 700 MXP

Brands by name

Popular brands

TANDBERG 700 MXP, User Manual

Search results

Summary of Contents for 700 MXP

Reviews:

Related manuals for 700 MXP

Brands by name

Popular brands