TANDBERG 1000 MXP User Manual Download Page 8

Page: 8 / 52

MXP Series Video Endpoints

User Guide

D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.

SUBMENUS

GOING FURTHER DOWN IN THE HIERARCHY

RADIO BUTTONS

RESTORE DEFAULTS

Navigating in the menus

Your TANDBERG system is operated by means of the remote control and a few basic navigation principles

All menu items having an arrow

appended allow you to go further

down the hierarchy and enter

another submenu.
Press the

key to go further down

in the hierarchy.

Once you have navigated to a topic

of interest, press

to select

that topic. You will then enter the

corresponding submenu.
The cursor position (the menu item

selected) is again indicated by an

orange frame.

Some choices consist of radio

buttons. Use the

Arrow

keys to

navigate and press

to select a

setting.

Restore default.

Select this icon and click

to restore default settings.

NAVIGATE IN THE MENU

ENTERING SUBMENU

The

key is used to enter

the submenu of an icon.

Moving about the menu using the

Arrow

keys.

THE ARROW kEYS

Use the four

Arrow

keys

to navigate

between icons

in a menu.

LEAVING A MENU

Cancel.

Select

this icon and

click

leave menu

undoing any

changes.

Save.

Select

this icon

and press

to leave

menu putting

changes into

effect.

THE MAIN MENU

This is

called

the main

menu.

The orange frame indicates the icon

currently selected.

www.cisco.com

Summary of Contents for 1000 MXP





















































Search results

Summary of Contents for 1000 MXP

Reviews:

Related manuals for 1000 MXP

Brands by name

Popular brands

TANDBERG 1000 MXP, User Manual

Search results

Summary of Contents for 1000 MXP

Reviews:

Related manuals for 1000 MXP

Brands by name

Popular brands