TANDBERG 1000 MXP User Manual Download Page 26

Page: 26 / 52

MXP Series Video Endpoints

User Guide

D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.

Calling two others simultaneously …

he MultiSite capability is an optional

feature in many TANDBERG

systems. This feature gives you the

possibility of arranging video meetings

by calling several others and have you

all connected together simultaneously.

For more on this, see

About video

conferences

Video systems

not

equipped with

MultiSite may still call another party

when already in a call.
Thus you may even here have two

calls running at the same time. Note

that the two parties will not be able to

communicate with each other, only with

you and only one at a time. The feature

requires H.323 or SIP to work.
If you are not sure whether your system

has this feature, contact your system

administrator.
When you make an additional call, the

party called first will be temporarily

suspended. The message “Please wait”

will appear on the screen of the party

suspended.
You may switch between the two

parties you have called by navigating to

the lowermost line in the main menu as

shown on this page.
This feature is not available on systems

with MultiSite installed.
Both calls made must be SIP or H.323

in order to make this feature work. This

feature is available on non-MultiSite

systems only. If in doubt, ask your

system administrator.

Calling two others at the same time

Non-MultiSite systems only!

If you select

Add another

Call

during a call

(press the

key

on the remote

control during the

call) and then

press the

key again…

… the call currently active will be

temporarily be set

On Hold

, which

can be seen from this line.

Call the second party

manually or by means of

the phone book in the usual

manner.

To switch

between the

two parties,

navigate

down to

this line and

press the

key on

the remote

control.

To terminate just

one of the calls,

use the

Arrow

keys

to navigate to that

number and press the

red

End Call

key on

the remote control. If

you want to terminate

both calls at the same

time, press the red

End Call

key again.

To end any or both of the calls,

press the

End Cal

l button on

the remote control. The menu

will then look something like

this…

www.cisco.com

Summary of Contents for 1000 MXP





















































Search results

Summary of Contents for 1000 MXP

Reviews:

Related manuals for 1000 MXP

Brands by name

Popular brands

TANDBERG 1000 MXP, User Manual

Search results

Summary of Contents for 1000 MXP

Reviews:

Related manuals for 1000 MXP

Brands by name

Popular brands