21
MXP Series Video Endpoints
User Guide
D1479201 MXP Series User Guide, May 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Y
ou end an ongoing call in the same
way as you do when using a mobile
phone— by pressing the red
End Call
key on the remote control. This will
produce the
Call
menu.
Note!
Switching off the monitor(s) using
the power on/off switch on the monitor
will not end an ongoing call. Some
systems even come with monitors that
cannot be switched off!
Ending conference calls
Ending a MultiSite call can only be done
by the host. The host is the party that
initiated the video conference.
The other parties can disconnect
themselves from the conference at any
time, but they have no influence on the
rest of the conference.
To end one or a few of the calls in a
MultiSite video conference, navigate to
the name of the call to be terminated
and terminate that specific connection
as if it were a simple point-to-point call.
Ending an ongoing call
Ending point-to–point calls
Press the
End Call
key or the
OK
key on
the remote control…
This will cause the
End Call
dialog box
to be displayed…
Then press the
End Call
key or the
OK
key on the remote control again…
Ending MultiSite calls
Press the
End Call
key or the
OK
key on
the remote control…
This will cause the
End Call
dialog box
to be displayed…
Then press the
End Call
key or the
OK
key on the remote control again…
www.cisco.com
