- 65 -
CMer
Error Code 2
Table-D2 sorts the contents of
CMer
error code 2 errors.
Displayed here is a further classification of the operation of
CMer
error code 1.
Table-D2
CMer
Error Code 2 Table
□□
Description
00
This error code is conform
s
to the upper "
CMer
Error Code 1".
20
An error occurring during ejection of the cartridge from the drive.
30
An error occurring during loading of the cartridge to the drive.
40
An error occurring during transporter P drive system initialization-error restoration.
50
An error occurring during ejection of the cartridge from the magazine slot.
60
An error occurring during loading of the cartridge to the magazine slot.
70
An error occurring during transporter Y move.
80
An error occurring during inventory check of the cartridges.
81
An error occurring during reading the bar code label.
9X
An error occurring during accessing the drive.
CMer
Error Code 3
Th
ese
error codes show a
n
essential factor of CMer error.See Capter6(code with cause
and
Recovery Procedure)
.
D.err
The displayed error codes are 4 digits and configured as described below.
Examples of error code displays :
D.err
○○○○
Table-D4 sorts the
D.err
error codes and their contents.
Table-D4
D.err
Error Code Table
○○○○
Description
0101
The Autoloader detected timeout error on the communication with the drive.
0110
The Autoloader detected parity error on the communication with the drive.
0111
The Autoloader detected framing error on the communication with the drive.
0112
The Autoloader detected overrun error on the communication with the drive.
0140
The Autoloader detected a
n
error on the Load/Unload command.
0170
The Autoloader detected a
n
error on the communication with the drive.
0180
The Autoloader detected a
n
error on the communication with the drive.(NAK retry over)
0181
The Autoloader detected a
n
error on the communication with the drive.(SNAK retry over)
0102〜010F,
0113〜013F
The Autoloader detected cartridge position or timeout error before issu
in
g
Load/Unload/Unthread command.
0190
The Autoloader detected timeout error before issuing Unload command.
0191
The Autoloader detected timeout error before finishing Unload command.
0192
The Autoloader detected state error on the communication with the drive .
