- 18 -
Operation 2
Press the "
ENTER
" key.
Display:
STATUS
Operation 3
Press the "
arrow
" key and select the
LOAD
command.
Display:
LOAD
Operation 4
Press the "
ENTER
" key and define the command.
Display:
Load Drv?
Operation 5
Press the "
arrow
" key and select "
Load Slt?
" .
Display:
Load Slt?
Operation 6
Press the "
ENTER
" key and execute the command.
Display:
Complete
(when the command ends normally.)
Err. xxxxxx
(when an error occurs.
xxxxxx
is the error code.)
Tip
•
Loading by command is valid only when slot
s
8 to 10 among the fixed slots
are all vacant slots.
•
When loading by command is executed, all cartridges housed in slot
s
5 to 7
within the magazine are moved to fixed slots.
Important
For using the
Tandberg LTO2 Autoloader
w/BCR
In using th
e LTO2 Autoloader
w/BCR, slot 10 must be a free slot
used
to swap a
cartridge during the inventory scan process. When you load
the 2
cartridges to
the fixed slots, i.e. slot 8 and slot 9, you can insert the
cartridges
into slot 5 and
slot 6 only. If a cartridge is in slot 7, loading
command is
failed and error
message of "
S10 forBCR
" is displayed on the
LCD.Then,
you remove the
cartridge
fro
slot7 manually, and retry the
loading command.
