- 6 -
1.3 Handling Precautions
To operate this device properly, please observe the following precautions.
1.3.1 Main Unit
●
Cooling fans are attached to the rear panel of the Autoloader. Do not use the unit in
places where the fans will be obstructed or there is poor air circulation. The
Autoloader should not be stored or used in extremely hot locations or in locations
having severe temperature changes.
●
The Autoloader is built with precision electronic components. Do not subject the
Autoloader to shock or either use or store it in locations that are exposed to vibration.
●
Do not use or store the Autoloader in locations where chemical vapors are dispersed
in the air or where the unit will come into contact with chemicals.
●
Do not move or transport the Autoloader while the power is ON.
●
Do not use or store the Autoloader with a heavy object on top of it.
●
Do not switch off the power while the Autoloader is operating.
●
To insert or remove a magazine, first check that the Autoloader is in a condition that
will allow insertion or removal of the magazine.
●
Only insert a cartridge into a magazine, nothing else.
●
Be sure to use the (rack mount)
Tandberg LTO2 Autoloader m
ounted in a rack .
(Rack mounting requires the
Tandberg LTO2
Autoloader Rack Mounting Kit.)
1.3.2 Cartridges
●
The data cartridge that should be used is the
TD
LTO
1
Data Cartridge (
TD
P/N:
432630-1
) and the
TD
LTO
2
Data Cartridge (
TD
P/N:
432744
).
●
The cleaning cartridge that should be used is the
TD
LTO
Universal
Cleaning Cartridge (
TD
P/N:
432631
)
●
See Chapter 4 for other precautions.
1.4 Transfer or Disposal of the Device
●
When disposing of this device along with the consumables and accessories, please
follow the
national and
municipal guidelines for disposal.
●
When transferring this device to another party, please include all items including this
manual.
