- 45 -
5.1.2.5.3 Setting Maintenance mode
To execute of the cleaning, setting maintenace mode is needed.
Operation 1
Switch ON the power and wait for the complet
ion
of power-on test.
Display:
READY
and
DRV empty
are alternately displayed.
Operation 2
Press the
ENTER
key.
Display:
STATUS
Operation 3
Press the
arrow
key and select the
MAINTENANC
command
Display
:
MAINTENANC
Operation 4
Press the
ENTER
key and define the command.
Display (line 1):
PASSWORD
Display (line 2):
0000000000
Tip
If you press the allow key, the number is up or down. If you press the enter
key, the number is decided and the cursor move next digit. If you have
made
a
mistake, press escape key
.
A
ll number
s you have entered are
canceled.
Tip
If you enter the invalid password, the following message will be displayed.
Display (line 1):
PASSWORD
Display (line 2):
invalid
