- 40 -
Operation 7
Press the
ENTER
key and define the command.
Display (line 2):
Enable
( or
Disable
)
and
RtyCnt XX
are alternately displayed.
5.1.2.2 Setting the CLNROL- function Disable
If you would like to set the CLNROL- function disable, follow the procedure described below.
Important
In normal operation, please use the default settings.
Operation 1
Switch ON the power and wait for the completion of power-on test.
Display:
READY
and
DRV empty
are alternately displayed.
Operation 2
Press the
ENTER
key.
Display:
STATUS
Operation 3
Press the
arrow
key and select the
MAINTENANC
command
Display
:
MAINTENANC
Operation 4
Press the
ENTER
key and define the command.
Display (line 1):
PASSWORD
Display (line 2):
0000000000
Tip
If you press the allow key, the number is up or down. If you press the enter
key, the number is decided and the cursor move to the next digit. If you have
made
a
mistake, press the escape key. All number you
have
entered are
canceled.
Operation 5
In this condition, press the
ENTER
key and set the above password.
Display (line 2):
RCLN MODE?
Operation 6
Press the
ENTER
key and define the command.
Display (line 2):
View?
