English
5
(Original instructions)
MEANINGS OF SYMBOLS
NOTE:
Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Hedge Trimmer
Displacement
It is important that you read, fully understand
and observe the following safety precautions
and warnings. Careless or improper use of the
unit may cause serious or fatal injury.
Spark plug
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Idle
Idling speed
Always wear eye, head and ear protectors
when using this unit.
Fuel tank capacity
Never touch the cutting blade when it is
running.
Dry weight (without fuel and blade case)
Choke – Run position (Open)
Blade type
Choke – Start position (Closed)
L
Overall blade length
On/Start
P
Blade pitch
O
ff
/Stop
Gear ratio
Emergency stop
L
pA, eq
ISO
10517
Sound pressure level LpA by ISO 10517
Equivalent*
Fuel and oil mixture
L
WA, eq
ISO
10517
Sound power level LwA by ISO 10517
Equivalent*
Idle speed adjustment
L
WA, Ra(M)
2000/14/EC
Measured sound power level LwA by 2000/14/
EC
Racing
Priming pump
L
WA, Ra(G)
2000/14/EC
Guranteed sound power level LwA by 2000/14/
EC
Racing
Hot Surface – Contact with hot surface can
cause serious burns.
a
hv, eq(F)
Vibration level by ISO 10517
Front handle / Equivalent*
Lubrication should be applied at 20 hour
intervals and more frequent at heavy use.
a
hv, eq(R)
Vibration level by ISO 10517
Rear handle / Equivalent*
Guaranteed sound power level
K
Uncertainty
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See “MAINTENANCE”.
NOTE:
Equivalent noise level / vibration level are calculated as the time-weighted energy total for noise / vibration levels
under various working conditions with the following time distribution:
* 1/5 Idle, 4/5 racing.
000Book̲TCH24EAP.indb 5
000Book̲TCH24EAP.indb 5
2019/01/29 17:39:10
2019/01/29 17:39:10
