TAMS MasterControl 40-01007, Manual

Page: 9 / 58

MasterControl English
Page 2.1
2. Getting started
Checking con tents
Please make sure that your package contains:
central unit MasterControl,
AC power pack,
cable to connect to a DCC programming track,
5-pole crimp connector to connect boosters,
compact disc containing USB-drivers and demo software,
this manual.
To use your digital control you need at least one booster. The contents of your package do not
include such a device.
Setting the language
With factoy settings the displays are shown in German. In order to change the language press the
following button while switching on the MasterControl:
1 for German
2 for English
3 for French
4 for Dutch
Saftey instructio ns
EayControl shoul d only be used in concordance with these instructions. It is not suitable for use
by children under 14. Incorrect use can be dangerous. In particular there is a risk of electric shock
through contact with metal parts under power, especially when an incorrect voltage is used, or
when operated in a too humid or wet environment. Therefore the following precations should be
observed:
Wiring should only be carried out when the control is disconnected.
Only operate indoors in a dry environment.
Only use proprietry transformers with the correct voltage.
Only connect the transformer in an authorised manner to the house power supply.
Use adequetly thick cable for all wiring. Too thin a cable can overheat.
If the layout is exposed to condensation, allow at least two hours for drying out.