TAMS MasterControl 40-01007, Manual

Page: 13 / 58

MasterControl English
Page 4.1
4. Display and controls of your MasterControl
1
Display
The digital display features two rows
displaying 16 digits each. During operation
und while adjusting parameters, all relevant
information is shown here. The backlight can
be individually set.
2
Keypad
The keypad has 10 num ber keys and the two
additional keys * / esc und # / ok. The
key * / esc also functions as shift key (
).
With 0 / menu you enter the menu.
3
Speed control knob
You can turn the speed control knob
continuously in both directions. You will
experience slight resistance while turning it.
A push-button is also integrated into the
speed control knob. By pushing it, an input
can be confirmed or during operation mode,
the driving direction can be changed.
The MasterControl and LokControl look alike.
To distinguish between them, the speed
control knob has different colours:
MasterControl: red
LokControl: black
4
Function keys
Colour Label Function
Yellow function
Switch on / off „function / light“, alternatively the function f0.
After entering a number on the keypad and subsequently
pushing function the respective function will be switched on
or off.
Blue f1 f2 f3 f4 Switch on / off functions f1 to f4 alternatively the functions
f5 to f8 when pressing shift (
) at the same time.
Switching points directions: f1 for “straight on”, f2 for
“branch off”.
Green go Switch on connected boosters.
Red stop Switch off connected boosters (STOPP-Mode) alternatively
emergency halt (HALT-Mode) when pressing shift (
) at the
same time.
1
2
3
4