TAMS MasterControl 40-01007, Manual

Page: 38 / 58

English MasterControl
Page 6.20
RailCom Support
RailCom Support
1: Tailbits
# / ok
Possible actions:
To set the RailCom support press # / ok.
Navigate to another menu point in submenu level 1 by turning the
speed control knob.
Go back to the main menu by pressing * / esc.
RailCom Support
1: Tailbits
Possible actions:
Adjust the RailCom support by turning the speed control knob.
Possible adjustments:
0: off. The Railcom support is switched off.
1: Tailbits. There will be left space for the RailCom cutout during
data transfer.
2: + IdNotify. The central unit sends regularly it´s identification.
(In addition to Tailbits).
3: + Accessory. The central unit sends regularly a point command,
to allow the points decoders sending feedback signal. (In addition
to Tailbits and IdNotify)
Confirm your input by pressing # / ok. You’ll then be taken back
to submenu level 1 and changes are saved.
Cancel with * / esc. You’ll then be taken back to submenu level 1
without saving changes.