tams elektronik 40-19507, Manual

Page: 7 / 40

tams
elektronik
!
BiDiBooster English
3. Safety instructions
Risk of fire
The BiDiBooster possibly gets very warm during operation. Thus be
careful to allow the air to flow unhindered around the ventilation slits.
If the air exchange is blocked components can overheat and catch
fire.
Risk of electric shock

Touching powered, live components,

touching conducting components which are live due to malfunction,

short circuits and connecting the circuit to another voltage than
specified,

impermissibly high humidity and condensation build up
can cause serious injury due to electrical shock. Take the following
precautions to prevent this danger:

Only operate indoors in a dry environment.

Wiring should only be carried out when the booster is disconnected.

Only use low power for this device as described in this manual and
only use certified transformers.

Only connect the transformer in an authorised manner to the house
power supply.

Use adequetly thick cable for all wiring. Too thin a cable can
overheat.

If the layout is exposed to condensation, allow at least two hours for
drying out.
Page 7