tams
elektronik
BiDiBooster
English
LED
The LED on the front lights or flashes indicating the operation modes or
problems that occur.
LED
Meaning
yellow – constantly lighting
The Booster is in operation.
yellow – slowly flashing
(approx. 1 sec. cycle)
No signal from the control unit, BiDiB
not connected.
yellow – quickly flashing
Programming has been started.
yellow – 2x flashing | break |
2x flashing
The booster has been switched off by
a points switching command.
red – slowly flashing
(approx. 1 sec. cycle)
The booster has been switched off
due to exceeding the maximum
temperature. After cooling it will be
switched on automatically (digital
signal from the control unit
provided).
red – quickly flashing
The booster has been switched off
after a short circuit. After x seconds it
will be switched on automatically
(digital signal from the control unit
provided).
red – 2x flashing | break |
2x flashing
The watchdog has been released and
the booster has been switched off in
consequence.
orange - flashing
No signal from the control unit, BiDiB
connected.
orange
– constantly lighting
The booster has been switched off
via a BiDiB command, the digital
signal is still provided.
Page 31
Summary of Contents for 40-19507
Page 1: ...t a m s e l e k t r o n i k Manual BiDiBooster Item no 40 19507 tams elektronik n n n...
Page 37: ...t a m s e l e k t r o n i k BiDiBooster English Page 37...
Page 38: ...t a m s e l e k t r o n i k English BiDiBooster Page 38...
Page 39: ...t a m s e l e k t r o n i k BiDiBooster English Page 39...
