tams
elektronik
English
BiDiBooster
6.2. Connecting the control unit
For the connection to the control unit you can use either
the DCC booster port (connection A) or
the BiDiB port (connection C).
In state of delivery the BiDiBooster is set to the use of the DCC-
conforming port. When you want to use the BiDiB port, you have to
alter the settings (→ section 7).
Connection A: DCC-conforming (3-pole) port
Via the connection "A" you can connect the booster either to
the control unit´s DCC booster connection or
if the control unit does not have a DCC booster connection: the
control unit´s track output.
In order to connect the cables to the booster use the enclosed
connectors which are designed to screw on the cables.
Connections control unit
E
Short circuit report wire
D
ground / data (-)
C
data (+)
Fig. 3: Connections
Page 18
Summary of Contents for 40-19507
Page 1: ...t a m s e l e k t r o n i k Manual BiDiBooster Item no 40 19507 tams elektronik n n n...
Page 37: ...t a m s e l e k t r o n i k BiDiBooster English Page 37...
Page 38: ...t a m s e l e k t r o n i k English BiDiBooster Page 38...
Page 39: ...t a m s e l e k t r o n i k BiDiBooster English Page 39...
