TallyGenicom 6300 Series, Maintenance Manual

Page: 22 / 175

6300 Series Maintenance Manual
16
1.10.5 Site, Power, and Space Requirements
To achieve optimum reliability and operation, proper site planning is necessary. Appropriate space,
temperature, humidity control, system interconnects, and main power source integrity are points
for consideration. Although the printers are designed with wide margins, optimum trouble -free
operation will be achieved when the environment is within the nominal specification range.
1.10.5.1 Main Power
The printers adjust automatically to the various worldwide power requirements, 110 ± 20V or 220
± 40V at either 60 ± 3Hz or 50 ± 3Hz. All voltages in the following table are single phase; all
listed currents are at nominal voltage and frequency.
6306:
External Power Current/Wattage Requirements @ Normal Voltage
AC Volts
(RMS)
Frequency
(Hz)
Average
Operating
Peak Operating Average Idle
(<5 min.)
Average Idle
(>5 min.)
110 50 1.0A/105W 2.3A/250W 0.3A/35W 0.2A/19W
110 60 1.0A/105W 2.3A/250W 0.3A/35W 0.2A/19W
220 50 0.5A/105W 1.2A/250W 0.2A/35W 0.1A/19W
6312:
External Power Current/Wattage Requirements @ Normal Voltage
AC Volts
(RMS)
Frequency
(Hz)
Average
Operating
Peak Operating Average Idle
(<5 min.)
Average Idle
(>5 min.)
110 50 2.2A/250W 4.6A/510W 0.4A/36W 0.2A/18W
110 60 2.2A/250W 4.6A/510W 0.4A/36W 0.2A/18W
220 50 1.1A/250W 2.3A/510W 0.2A/36W 0.1A/18W
“Peak Operating” is 100% Black page, 60x
72 dpi
“Average Operating” is 40% ASCII, draft font
1.10.5.2 Space Requirements
Adequate space must be provided to permit the operator access to the operator panel, and to the
forms input/output at the front and rear of the printer.