Tally T8106, User Manual

Page: 203 / 212

Appendix E Network Management
195
Configuring SNMP Server Settings
This printer supports SNMP to manage its network interface. You can use
MIB II, Printer MIB, and TRAP for SNMP management.
Parameter Description
Monitor
Community
Sets a community name for reading MIB.
Control
Community
Sets a community name for writing MIB.
Trap
Community
Sets a community name for the TRAP informa-
tion.
Trap Target
Sets the send destination of the TRAP informa-
tion. This setting will validate TRAP. You can
select IP and IPX as the TRAP send protocol.
Enter 0 or 1 to the beginning of an address as a
protocol identification flag.
Authentication
Traps
Enables or disables Authentication Traps.