Tally T8106 User Manual Download Page 104

Page: 104 / 212

Tally T8106/T8406 Color Laser Printers User Guide

5. Pull the used OPC belt cartridge

upward and out of the printer carefully

to avoid spilling toner.

6. Discard the used OPC belt cartridge as

indicated in “Disposing of Supplies” on

page 97.

Caution!

Do not touch or wipe off any powder that is on the OPC belt, nor expose

the OPC belt to light.

7. Remove the two shipping pins from the

new OPC belt cartridge.

8. Remove the protective sheet that covers

the photosensitive belt.

9. Slide the new OPC belt cartridge down-

ward into both green lock-lever guides

and into the printer carefully.

10. Push the green OPC belt cartridge lock

levers down until they lock.

Summary of Contents for T8106





















































































































































































































Search results

Summary of Contents for T8106

Reviews:

Related manuals for T8106

Brands by name

Popular brands

Tally T8106, User Manual

Search results

Summary of Contents for T8106

Reviews:

Related manuals for T8106

Brands by name

Popular brands