Tally T8106 User Manual Download Page 165

Page: 165 / 212

Appendix C Control Panel Menu Functions

157

Tray1: A4

Offline

2. Press the

ONLINE

key to go

offline.

Panel Menu

Printing Menu

3. Press the

MENU

key to start the

Panel Menu and display submenus.

Panel Menu

Network Menu

4. Press the and keys to go to

the Network Menu.

Network Menu

Gateway Address

5. Press the

ENTER

key to

select the Gateway Address sub-

menu.

Gateway Address=

[0]0.0.0 *

6. Using the and keys, change

the number in parentheses to 192.

Then, press the key.

Gateway Addr

192. 168 [0] 0

7. Using the and keys, change

the number in parentheses to 168.

Then, press the key.

Gateway Addr

192. 168. 31 [0]

8. Using the and keys, change

the number in parentheses to 031.

Then, press the key.

Gateway Addr

192.168. 31. (027)

9. Using the and keys, change

the number in parentheses to 027.

Then, press the key.

Gateway Addr

192. 168. 31. 27*

10. The IP address has now been set.

Network Menu

Gateway Address

11. Press the key to leave the IP

Addr submenu. The Network

Menu appears.

Summary of Contents for T8106





















































































































































































































Search results

Summary of Contents for T8106

Reviews:

Related manuals for T8106

Brands by name

Popular brands

Tally T8106, User Manual

Search results

Summary of Contents for T8106

Reviews:

Related manuals for T8106

Brands by name

Popular brands